Server Rack Selection Rack Solutions
https://www.racksolutions.com/rack-mount-enclosure.html#ref=home
DIMENSIONS
Rack Units | Available in 18U to 42U | ||||||||||||
Rack Mount Depth |
*Measured with installation depth of 29.125" (740 mm) |
||||||||||||
Weight Capacity | 1680 lbs. (762 kgs) Rated capacity on leveling feet (without casters) |
||||||||||||
Rack Outside Dimensions | D x W 39" x 23.5" (1000 x 597 mm) Height & Weight
|
||||||||||||
Included Hardware | (40) 12-24 cage nuts (40) 12-24 x 3/8" screws (2) keys |
||||||||||||
Hole Type | EIA 3/8" square holes | ||||||||||||
Rack Post Shape | L Shape
|
Features & Options
These Rack Model 151 server racks are compatible with Dell, HP and IBM servers and computers. They are also compatible with most other standard brands as well. These server racks meet the EIA standards for 19″ server racks. The fully enclosed server racks range in size from an 18U server rack to a 42U server rack, perfect for most any server room or data center. The Rack Model 151 also ships fully assembled and ready to roll into place and start using immediately. Security has been addressed as well, with our locking front and back doors and locking side panels. Latches can be upgraded for even more security as well!
Fantray
Fantray Bottom
Fantray – Open
Fantray Top
Fans: | (6) Axial AC Fans | Fan Dimensions: | 120 mm x 120 mm x 38 mm | Fan Tray Dimensions: | 17.16" W (435mm) X 17.31" (439mm)D |
Power: | 100-125VAC 50/60 Hz 0.20A per fan (1.2A Total) | Speed: | 2000/2400 rpm | ||
Noise: | 36/40 dBA | Air Flow: | 61/75 CFM per fan (366/450 CFM Total) |
The fan tray is powered with a standard 110 power cable that may be plugged into a power strip or PDU.
Vertical Cable Management Bar
The Vertical Cable Management bar works exclusively with these Rack-151 server enclosure. These trays run vertically from the top to the bottom of the server rack and allow you to route cables to data switches or UPS devices in a structured manner. They come in 6 different sizes to complement our range of premium server cabinets, and you can mount one on either side of the cabinet.
Latch Upgrade
The standard latch on the RACK-151 is the same for every rack. If you are purchasing multiple racks and require the latches to be different on each, a Latch Upgrade is available for purchase. P/N: RACK-151-LATCH, for each rack. This upgraded latch offers a much higher degree of security compared to the standard latch. The upgraded latch has a high quality, 5 tumbler lock, and is made in Germany. Latches with master keys are also available upon request. Pricing is available upon request, give us a call.
Baying Kit
For added stability, the Rack Model 151 may be coupled together with other Rack Model 151 units. This is accomplished with a Baying Kit. The Baying Kit requires the removal of the side panels of the server enclosure, but locks multiple racks together. This is a great way to keep your data center clean and uniformed with all your data center enclosure lined up in a row.
Filler Panels- 10 Packs
The Filler Panels- 10 Packs are designed to work with these racks specifically. Use these 10 packs to fill the space not occupied by your equipment.
Cage Nut Tool
A Cage Nut Tool may be used to install or uninstall those pesky cage nuts. Don’t tear up your fingers. This tool features 3 holes (10-32, 12-24 and M6) that are sized and labeled for you to easily check to see what screws you have. It also comes with a “U” space size reference guide on the back, a must have for any IT professional, or data center!
Server Cabinet Enclosures – Technical Specifications
Rack Units | Available in 18U to 42U |
Rack Mount Depth |
|
Weight Capacity | 1680 lbs. (762 kgs) Rated capacity on leveling feet (without casters) |